Product parameters

• QIBR No.Q16313001
• KAYDON No.16313001
• Bearing Type Four Point Contact
• Bearing Material 42CrMo, 50Mn, Stainless Steel
• Seal Material FPM, NBR

Load Capacity

• Gear Tooth Rating(Fz)42160lbs(187.527KN)
• Moment load rating (Crm)4208350ft-lbs(5706522.6N-m)

Overall Dimensions

• Outside Diameter of Outer Ring (Do) 98.800"(2509.52mm)
• Inside Diameter of Inner Ring (di) 78.400"(1991.36mm)
• Height of overall bearing assembly(H) 6.625"(168.28mm)
• Height of outer ring(Ho) 6.000"(152.4mm)
• Height of inner ring(Hi) 6.000"(152.4mm)
• External diameter on outer ring(Dr) 98.000"(2489.2mm)
• Internal diameter on inner ring(dr) -
• Approximate Weight (lbs) 4000lbs(1814.36KG)

Mounting Holes

• Bolt Circle in Outer Ring (Lo) 94.250"(2393.95mm)
• Number Holes in Outer Ring (no) 72
• Size of hole in outer ring(Bo) 1.562''(39.67mm)
• Bolt circle in inner ring(Li) 82.500"(2095.5mm)
• Number Holes in Inner Ring (ni) 60
• Size of hole in inner ring(Bi) 1.812''(46.02mm)

Gear Data

• Pressure Angle of Gear Teeth (α) 20 º
• Tooth form SD
• Pitch Diameter (D2) 98.000"(2489.2mm)
• Pd or (m) 2''(50.80mm)
• Number of Teeth (z2) 196
• Addendum modification coefficient of gear teeth(x2) 0
• Face width of gear teeth(b2) 4.750''(120.65mm)